Latest News – Archive

News for Nuventix Thermal Management – Archive

April 19, 2011 – Nuventix Doubles Lumen Output for PAR38 LED Bulbs: New reference design provides a first ever, easy solution for LED lamp developers
Nuventix, Inc., today unveiled a new thermal management reference design, including electronic drive, that simplifies development and significantly improves lumen output of LED bulbs for PAR38 sockets. The Nuventix SynJet cooling engine and heat sink provides lighting designers with a complete system for achieving a more than 2,000 lumen LED array that fits into the American National Standards Institute (ANSI) PAR38 form factor – more than doubling today’s lumen output for PAR38 LED bulbs…… more 
March 3, 2011 – LEDs Cooled by SynJet Named Winners of Next Generation Luminaires Competition by US Department of Energy: Nuventix cools next generation of LED light fixtures
At this year’s Strategies in Light conference, an event showcasing the latest advancements in LED lighting, the US Department of Energy (DOE) and a panel of 12 judges drawn from across the lighting design community named 15 LED downlight and accent light fixtures winners of the 2010 Next Generation Luminaires competition. The Nuventix SynJet cooled two of these award-winning fixtures, recognized for their warm color, even distribution of light and small form factor…… more 
November 17, 2010 – SynJet Technology Helps Europe Go Green: New Stores Light Up with Cooled Down LEDs
Nuventix, Inc., LED industry thermal management specialist and electronics cooling innovator, today announced it is seeing significant adoption of its SynJet technology across Europe, most notably in store installations of the region’s largest retailer. SynJet LED coolers maximize lumen output and extend the life of LEDs in the stores of Carrefour’s new hypermarket concept, Planet Carrefour. With SynJet, Planet Carrefour stores are bathed in bright light while using less energy…… more 
November 3, 2010 – Nuventix Helps Develop International Standards for LED Lighting: Company driving thermal management discussion in Zhaga
Nuventix, Inc., an LED industry thermal management specialist, today announced the company has joined Zhaga, a global cooperation formed to develop standards for the LED lighting industry. Nuventix participates in Zhaga as one of the industry’s premier thermal management specialists with the knowledge and experience to set standards for cooling down solid state lighting…… more 
July 8, 2010 – Nuventix’ LED Cooling Solutions Now Available from Future Lighting Solutions: Fanless Thermal Management Products for High Power LED Applications, Including Solutions for Philips Fortimo & Lexel Light Engine Modules
Nuventix, Inc., developer of SynJet® thermal management solutions for LED luminaires, today announced a distribution agreement making the company’s reliable LED cooling products available from LED lighting component and support services provider Future Lighting Solutions. Nuventix solutions help increase the brightness and LED lifetime of solid state luminaires by actively displacing heat, even in small spaces such as recessed downlights and spotlights…… more 
May 12, 2010 – Nuventix Introduces SynJet “CoolTwist” LED Cooler For Philips Twistable Module: Doubles the Life of the Philips Fortimo Twistable TDLM
From LightFair 2010, Nuventix, Inc., innovator of SynJet® membrane cooling thermal management solutions, today announced the general availability of the SynJet CoolTwist LED Cooler for Philips Twistable. This new SynJet LED cooler from Nuventix doubles the lifetime predictions of the newly announced Philips Twistable LED TDLM to 50K hours, providing ultra long life with the smallest thermal solution possible…… more 
April 6, 2010 – Nuventix Unveils Second Generation of Award-Winning SynJet Thermal Management Technology: SynJet Continues to Move LED Market Forward by Lowering Power Consumption While Improving Performance
Nuventix, Inc., innovator of SynJet® active thermal management solutions, will reveal next week to attendees at Light+Building 2010 the next generation of its groundbreaking active cooling technology. The second generation module builds upon the inherent strengths of its patented predecessor, SynJet technology…… more 
April 6, 2010 – Nuventix Unveils SynJet Spot Light Cooler: New LED Cooler for Spot Lights Packs Powerful Punch in Small Package
From Light+Building, Nuventix, Inc., innovator of SynJet® active thermal management solutions, today announced the general availability in EMEA of the SynJet Spot Light Cooler. Nuventix’ SynJets are the smallest, most reliable, and adaptable thermal management solutions in the solid state lighting industry, and LED spot lights are one of the most demanding applications…… more 
March 8, 2010 – Nuventix Selects Nypro as Manufacturing Partner for SynJet Thermal Management Solutions: New Partner Brings Global Presence and Design Support Expertise
Nuventix, Inc., innovator of SynJet® active thermal management solutions, today announced it has signed a Manufacturing Services Agreement with Nypro Inc. Nypro provides plastic injection molding and turn-key assembly of Nuventix products. Under the terms of the agreement, Nypro will perform new product introduction (NPI) and manufacturing services for Nuventix…… more 
January 12, 2010 – Nuventix Names Tom Dalton Vice President of Worldwide Sales: Mr. Dalton Brings Global Sales Experience to Nuventix Team as LED Thermal Management Accelerates Worldwide
Nuventix, Inc., innovator of SynJet® thermal management solutions, today announced the expansion of its executive team to include Tom Dalton as Vice President of Worldwide Sales. Mr. Dalton joins Nuventix from industry leaders such as Honeywell and Tyco Electronics where he served in global executive management roles. Mr. Dalton will be responsible for expanding customer relationships via direct and indirect sales organizations, field applications engineering and the insides sales support team…… more 
October 19, 2009 – Nuventix and Bias Power Introduce New Power Supply Solution: Bias Power SynPowertm Module Brings Together SynJet Active Cooling and Optimal Power Solution for High Brightness LED Luminaires
Nuventix, Inc., innovator of SynJet® active thermal management solutions, and Bias Power, Inc., manufacturer of patented low power AC-­‐DC power supplies, jointly announce the introduction of SynPower series power supplies. SynPower is the standard power supply solution for SynJet in LED luminaires. This high efficiency power and cooling product combination speeds time to market of new LED designs by providing the SynJet active cooling solution and power-­‐matched power source in a compact package…… more 
October 19, 2009 – Nuventix and ROAL Electronics Announce New LED Driver & Cooling Product Combination: Key Thermal and Power Package Enable Rapid Market Entry
Nuventix, Inc. and ROAL Electronics S.p.A. have agreed to collaborate on a high efficiency power and cooling product combination for the LED lighting market. Under this agreement, ROAL has developed a new series of LED drivers that will operate seamlessly with Nuventix’s SynJet® LED active cooling modules. This driver series is called VENTO…… more 
May 4, 2009 – Nuventix Appoints Brian Dundon to Board of Directors: Lighting Veteran Brings Extensive Industry Experience to Nuventix Team
Nuventix, Inc., innovators of SynJet® active thermal management technology, today announced the expansion of its Board of Directors to include Brian R. Dundon. Mr. Dundon currently serves as the Chair of the Lighting CEO Board for the National Electrical Manufacturers Association (NEMA) and is the former President and CEO of Philips Lighting Electronics. Mr. Dundon was instrumental in bringing new electronics products to market while at Philips, including to the LED market which Nuventix’s SynJet technology is now enabling…… more 
May 4, 2009 – Nuventix Launches Compact SynJet Cooler for Philips Fortimo and Lexel LED Downlight Module: It’s the Smallest LED Thermal Solution for Philips 2000 Lumen Downlight Module Allowing for Installation Through a less than 140mm Diameter Opening
Nuventix, Inc., innovator of SynJet® active thermal management solutions, announces the general availability of the SynJet Universal DLM cooler for the Philips Fortimo/Lexel LED Downlight Module. This Nuventix active cooling product is the most compact and low profile luminaire available in the market today. SynJets are the most reliable, adaptable and quiet thermal management solutions for the solid state lighting industry…… more 
April 13, 2009 – Nuventix Secures $8 Million in New Funding: Funds Will Accelerate Asian Market Development and Advanced Engineering
Nuventix, Inc., innovator of SynJet® active thermal management solutions, announced today it has closed $8 million in new funding. The funding will accelerate advanced development of the company’s groundbreaking SynJet cooling technology, an active cooler of solid state lighting which uses synthetic jets to enable energy efficiency and reduce energy consumption in lighting designs. Funding will also be used to add support resources for existing and new Asian distributors as Nuventix expands its geographic reach…… more 
May 4, 2009 – Nuventix Announces New Family of SynJet Thermal Solutions for LED Lighting Industry: New Synthetic Jet Coolers Broaden Current Offerings and Opens New Markets, Optimal for all Recessed, Track and Spot Light Applications
From Strategies in Light 2009, Nuventix unveiled three new active cooling solutions for the solid state lighting industry: the SynJet PAR20 LED Cooler, SynJet 3-inch LED Cooler and SynJet PAR30 LED Cooler. All three of these patented, quiet, adaptable and extremely reliable active thermal management solutions house Nuventix’ SynJet technology as well as standard heat sinks to effectively and uniquely cool LED lighting solutions…… more 
Dec 15, 2008 – EBV Elektronik and Nuventix, Inc. Sign Distribution Franchise Agreement for the EMEA Region
EBV Elektronik, an Avnet (NYSE: AVT) company and Nuventix, Inc., today announced an EMEA distribution agreement. EBV Elektronik will distribute Nuventix’ full line of cooling solutions designed for use with solid-state lighting products, high-performance CPUs, ASICs, FPGAs and microelectronics…… more 
Dec 15, 2008 – Nuventix Secures $14 Million C Series FundingEnergy Efficient Cooling Technology Attracts New Investors
Nuventix, Inc., innovators of SynJet™ technology cooling solutions, announced today the completion of a $14 million round of funding led by Advanced Technology Ventures (ATV). The new funding will support rapid market adoption the company has seen over the past year as SynJet technology becomes the preferred solution for LED lighting, consumer electronics and computer chip cooling…… more 
Mar 18, 2008 – SynJet® Technology Inventors Honored with the Harver Rosten Award for ExcellencePrestigious Award Announced at IEEE SEMI-THERM 24 Symposium
Dr. Raghav Mahalingam and Professor Ari Glezer, SynJet technology inventors with Nuventix, Inc, electronics cooling technology innovator and LED industry thermal management specialist, were awarded the Harvey Rosten Award for Excellence today at the IEEE SEMI-THERM 24 Symposium in San Jose, California. They were recognized for their pioneering work on synthetic jet cooling, both from a theoretical and an applications point of view…… more 
October 24, 2007 – Nuventix Introduces Two New Cooling Modules for LED Industry: Synthetic Jet Coolers for PAR-38 and MR-16 Bulbs Now Available
From LEDs 2007, Nuventix today unveiled two new cooling modules for the LED industry. These two products, utilizing Nuventix’ SynJet™ technology, will provide reliability, low audible noise and low power consumption cooling technology for two industry standard lighting configurations. Using the SynJet approach allows twice the light output compared to passive designs…… more 
January 28, 2007 – Nuventix Selects Leading EMS Provider as NPI and Manufacturing Partner for SynJet Fanless Air Cooling Products: Top tier manufacturer enables high volume capacity, global supply chain for electronic air cooling solutions
Nuventix, Inc., the Austin-based active thermal management solutions company today announced that it has signed a Manufacturing Services Agreement with Flextronics. Under the terms of the agreement, Flextronics will perform new product introduction (NPI) and manufacturing services for Nuventix. Flextronics will provide development and design for manufacturability support for the SynJet electronic cooling products from its NPI Center in Shanghai, China…… more